B208 Octo-input Module

Download Datasheet - B-Series B208.pdf 

• Programmable input point functions
• Easy to read switch addressing
• Quick modular interconnect wiring connector
• Provides eight points

         The B208 Octo-input Module is an 8 point expansion device that connects to the control panel through the SDI2 bus. This module is fully supervised and communicates back to the control panel all point status changes. The module's expansion points
operate the same as the points on the control. Industrial, commercial, and institutional facilities are typical installations for the B208 module. The B208 Octo-input Modules connect to the SDI2 bus on the control panel using Terminals 33 through 36, or using
the interconnect cable. You can connect multiple B208 modules to a single control panel. The B208 switches allow for ease of use in device addressing.

System overview

          The B208 Octo-input Module connects to B5512, B4512, D9412GV4, D7412GV4 and D7212GV4 control panels through the SDI2 bus. This module is supervised and communicates back to the control panel all point status changes. The module’s
expansion points operate the same as the points on the control panel.

Functions

Loop inputs
          The B208 uses up to eight inputs which may be Normally Open (NO), or Normally Closed (NC) with 1k Ω EOL resistor(s) for supervision.